Bow Hunting: Best Broadheads for Deer and Elk

Being the first thing that hits the target, broadheads are considered to be the verdict that tells how well you are as an archer and hunter.

The impact strength and speed kill depend on what broadhead is used. Animals for hunting are of different sizes so they would employ specific types of broadheads.

We will soon discuss the best broadheads for deer and elk. Moreover, in this article, we will feature the best broadheads for hogs and turkeys.

Best Broadheads for Deer

Whitetail deer is, in fact, the most hunted game in the United States. They are widely prevalent, and there is a need to control their population at times so they won’t disrupt the balance of the ecosystem.

Aside from population control, they are also hunted for sport. Bucks are hunted more than any other animal because of their meat volume and also for their antlers as game trophies.

Best Broadheads for Deer

Choosing best broadheads for deer can be determined by how well and deep the arrowhead can cut into the flesh of the deer to cause massive blood flow.

Broadheads are largely categorized as fixed blades and mechanical blades. There’s also the minority of hybrid broadheads that are a combination of both fixed blade and mechanical blade.

There are also factors to consider before buying them by set. We have made an article about the different factors to consider in buying best broadheads recently; you can check it out here.

For deer alone, hunters had many arguments on what type of broadhead to use. Some agree with fixed blade and others on mechanical blades. What comes, in the end, is that it’s a matter of preference and experience.

Mechanical blades are only made in recent human history while fixed blades have been around since our ancestors’ time. It’s only natural that there are hunters that will side with fixed blades for historical reasons and their incredible penetration.

Depending on how durable is the broadhead, some fixed blade models can puncture through bone, and they can immediately render the deer unable to run away.

This saves the hunter the time in tracking the blood trail of a wounded animal. Mechanical blades can’t easily achieve that feat, but it can cut wider into the hide of the animal to procure intense blood loss.

For fixed blade broadheads, we recommend you to use G5 Outdoors Montec. When you buy this product, you get three broadheads in a set. It’s made of hard stainless steel so rusting won’t be an obvious problem.

At 100 grains, the cut on contact tip has a cutting diameter of 1 1/16”. The razor sharp edges are claimed to be as durable as diamonds. Its accuracy is on point, and no prey shall ever live after being hit with this.

For mechanical blade broadheads, Wasp Jak-Hammer 100 SST is one of the best to take down the buck, maybe for flesh or trophy. It travels fast and is accurate.

The sharp tip is made of stainless steel and can even smash through a bone. The blades open at the rear by neoprene so the cutting diameter is already large at 1 3/4” when the broadhead hits the animal hide.

Best Broadheads for Elk

Elk is known to be large animals so taking them down is on another level than with hunting whitetail deer. They are not only tall, but their weight is exceptionally large as the largest species belonging to the deer family.

An average elk cow’s weight ranges at 225 to 240 kilograms while its male counterpart or the bull is 40% heavier ranging from 320 to 330 kg.

Best Broadheads for Elk

Hunting elk is not easy; they are known to have tough hides, and you can only have one shot to take it down. Comparing deer and elk, the latter are better runners even if wounded.

The deer can’t run very far when shot on a vital spot. But the elk can run for a few more miles before dropping dead. Nothing is more terrible for a hunter than successfully placing an arrow on a prey but failing to harvest it.

This is where the right broadheads act their role. Ordinary broadheads won’t cut it as you need something that can penetrate deep into the tough hide and muscle.

This characteristic exclusively belongs to fixed blade broadhead. It is known to be very sturdy, and if you choose the correct model, you can punch through the bone of the elk and halt its ultimate escape.

Using mechanical or expandable broadheads could be against right judgment as those broadheads aren’t sturdy or durable enough unlike fixed blades. The firing of the arrow with a mechanical broadhead on an elk would be a wrong move as there are chances that the blades will deploy midway because of malfunction.

This, in turn, would only mark a light wound on the elk, not even enough to make it lose lots of blood. If you track it, the trail would be so far that you won’t have the energy to go on further.

Fixed blade broadheads like Wasp Hammer SST is a prime example of a heavy duty broadhead that can take on an elk. Its weight is 100 grains, and a cutting diameter of 1 3/16” – quite large for this broadhead. In fact, penetration is the primary focus of this one because the tip is not cut on contact. Instead, it is a chiseled tip made of stainless steel.

Wasp Boss SST 4-Blade is also similar with the previous broadhead as they are both fixed blades. Not only fixed blades but they are both chiseled tips that take deeper penetration to the next level.

The four blades aren’t directly connected to the tip, so there’s little surface area when the broadhead pounds on an animal hide giving leeway to dig deeper and even to reach elk’s bone. At 100 grains, it has a cutting diameter of 1 1/16”.

Best Broadheads for Hogs

Whitetails are popular hunting game because there are so many distributed across all of America, but you also shouldn’t forget that you can hunt other animals like hogs or wild boars. These hogs are backyard wreckers, so you don’t want their population to blow up.

Best Broadheads for Hogs

Feral hogs are different than hunting deer or any thin-skinned animal. They have ridiculously thick hides, and older ones have “shields” that are all found on the shoulders and backs. These shields are stored fat that can be hard to penetrate.

They are naturally developed to protect them during fights with other feral hogs. Blood gushing out of the animal could be quite little as their hides can also absorb the liquid. On another case, the fat would gather up and close the wound.

Since hogs or boars have a limited field of view due to how their heads are dipped close to the ground, don’t underestimate the animal.

If they sense danger, they will dart off or could be very aggressive and attack you. Maintain your good distance with the boar and only use a bow and a high-quality broadhead.

Shooting a feral hog’s vital areas isn’t the same as hunting whitetails. If you apply on a boar about how you killed a deer, it might just as well be a gut shot.

You must aim at their lungs for a good shot. They are found from the front leg up to the midpoint of the boar’s chest. The target will run away, and you should have a good sense of tracking as the blood trail can be quite difficult because they don’t drip as much as a deer’s.

For broadheads, most hunters can agree that fixed blade broadheads are the best choice in shooting down a feral hog. They will recommend that you use a fixed blade broadhead that is of high-quality and can be utilized again and again.

This means cheap broadheads won’t cut it as their sharpness degrades shot after shot. Sure, you can take down a hog, but that’s the first and final one.

When it comes to hunting them, fixed blade broadheads are the very best choice because of penetration.

Mechanical broadheads aren’t a good choice because of the blades prematurely opening up before hitting the animal. And also, some mechanical broadheads don’t have much penetration so the part that was hit of the animal may just as well close up because of the fat.

For high-quality broadheads that can assure you good penetration, you can try Rage X-treme broadheads. They have two blades and aren’t like the regular ones that have three or four blades for a multi-dimension shot.

But Rage X-treme’s wound channels are very impressive with maximized precision. This 100-grain broadhead not only assures penetration but its cutting diameter is all the more imposing at 2.3”.

Other than that, it’s for big animals because it’s designed for bow draw weights more than 60 lbs.

Best Broadheads for Turkeys

You know that there is a turkey in an area if you hear them gobble or cluck. These large birds are vocal and easy to find in flocks.

If they’re alone, then all the better. However, they can be hard to hunt as they can see you from a distance.

Turkeys have enhanced eyesight and hearing, and they can sense danger. If they notice you, they will quickly run away as they are fast runners.

Best Broadheads for Turkeys

Turkeys are considered by most hunters as one of the toughest animals to take down. This is because when a turkey is shot that doesn’t cause instant kill, it takes off at a fast speed and then tracking it would be very hard to impossible.

The vital areas of turkeys are small and targeting them for an instant drop dead act would be difficult. Remember that turkeys are smaller game than those you have hunted; which would mean that at a distance, the bird would appear to be quite small.

You can target the head or the neck of a turkey for an instant kill. You can also target the legs so it won’t take you a far distance to track the animal. If it’s facing on the opposite side, you can hit another vital part – its anus.

You can use fixed blade broadheads or mechanical broadheads. Turkeys aren’t thick-skinned, so there’s little need to smash through their fur deeply.

However, the target being small at a distance and it goes for the same of its vitals, you will need a broadhead that cuts large. This is the perfect stance for the mechanical broadheads.

Mechanical broadheads like Bullhead 3-Blade are plenty good enough to stop a turkey’s escape. Looking at this broadhead, you can tell at first sight that it would be a turkey’s worst nightmare.

At 125 grains, this broadhead has a cutting diameter of 3 3/4″. Its large cutting surface is perfect for head and neck shots. The vital parts being small already, using this broadhead could only mean an instant kill or not.

Conclusion

You have reached the end part of the article about the best broadheads for deer and elk, and also the best broadheads for hogs and turkey.

Now that you have the information on how hard to hit the target and what blades to use, you can start shopping to equip the broadheads to your arrow shafts the next time you go hunting.